Disengage parking brake motor dies
- Thread starter jman1717
- Start date
- Views: 72789
OldMachinist
Platinum Member
Did just unplugging it work? If not I tell you why. They have got sneaky on us. When you unplug the connector on the seat switch there is a little spring plunger in the center of the plug that moves to also close the connection. To bypass this take a small screwdriver and push the little plunger until it clicks. No jumper wire needed. Make sure you get new switch as soon as possible and when you install it push the plunger back before you connect the plug. Nope I'm not a dealer just someone with lots off time on my hands. You got the Nashville part right just the wrong state.
OldMachinist
Platinum Member
Did just unplugging it work? If not I tell you why. They have got sneaky on us. When you unplug the connector on the seat switch there is a little spring plunger in the center of the plug that moves to also close the connection. To bypass this take a small screwdriver and push the little plunger until it clicks. No jumper wire needed. Make sure you get new switch as soon as possible and when you install it push the plunger back before you connect the plug. Nope I'm not a dealer just someone with lots off time on my hands. You got the Nashville part right just the wrong state.
left work real quick went home and bam. Exactly like you said although I pushed to hard and the spring fell out. But I can mow the yard today, and worry about this after that. It's still under warranty so surely this will be covered. Anyways I owe you one or 12 of your finest beverage. Thanks /forums/images/graemlins/grin.gif
left work real quick went home and bam. Exactly like you said although I pushed to hard and the spring fell out. But I can mow the yard today, and worry about this after that. It's still under warranty so surely this will be covered. Anyways I owe you one or 12 of your finest beverage. Thanks /forums/images/graemlins/grin.gif
coachred
New member
ok i tried the wire jump and without and it still dies is there any thing else.
Thanks coachred
Thanks coachred
AautoMan
New member
OldMachinist - I just had the same problem with my John Deere 345 lawn mower and by fixing the seat switch it now works great. Thanks !