1st fws
New member
- Joined
- Apr 24, 2014
- Messages
- 7
- Location
- Holden,La.
- Tractor
- 1955 800 ford utility 5 speed non live pto
installed new aftermarket distributor on 55 850 ford.won't start.
distributor woes
- Thread starter 1st fws
- Start date
- Views: 742
leonz
Super Member
HMM?
6 volt or 12 volt??
Do you need a new rotor?
is the cap tight to the base?
Were the wire ends pushed all the way in to create contact?
Healthy spark?
good coil
Battery up to snuff?
6 volt or 12 volt??
Do you need a new rotor?
is the cap tight to the base?
Were the wire ends pushed all the way in to create contact?
Healthy spark?
good coil
Battery up to snuff?
Recoveryhill
Gold Member
Is your timing right? Rotating the distributor changes timing of spark.
RickB
Super Star Member
- Joined
- Sep 18, 2000
- Messages
- 15,143
- Location
- Up the road from Dollar General WNC
- Tractor
- Just a Scag
You probably installed it incorrectly.
The big question not answered, why did you replace the distributor? Did someone tell you it was bad? Now to the serious stuff, did you note the position of the rotor button before removing? Could the coil be bad? Have you tried rotating the distributor back and forth as the engine is being cranked?
