RjCorazza
Elite Member
This is what I installed.
https://www.racorstore.com/racor-215r2-fuel-filter-water-separator-assembly.html
The head can have 2, 10, or 30 micron filters.
DK35 no start.. fuel issue? HELP!!
- Thread starter tracstarman
- Start date
- Views: 2126
This is what I installed.
https://www.racorstore.com/racor-215r2-fuel-filter-water-separator-assembly.html
The head can have 2, 10, or 30 micron filters.
OP
tracstarman
New member
- Joined
- Jul 25, 2007
- Messages
- 10
Perfect! Does this fit the old mounting location or did you have to fab something up or mount it somewhere else?
Do you know the size of the fuel hose that is on there stock?
Just trying to avoid multiple parts runs/orders... thanks again!
RjCorazza
Elite Member
My install is on a *Kubota L4060, so I can't really offer specific mounting info for your machine.
Mine would not fit in the same location as the OEM filter, so I used an unused hole in the loader arm that has a bolt tap welded on the inside. I may tap a second hole, but so far one bolt has been adequate. I never remove my loader, so mounting on the loader arm is a non issue for me.
Mine would not fit in the same location as the OEM filter, so I used an unused hole in the loader arm that has a bolt tap welded on the inside. I may tap a second hole, but so far one bolt has been adequate. I never remove my loader, so mounting on the loader arm is a non issue for me.
