DK45 FRONT BUCKET ROLLBACK

[diesel7.3]

does anyone know how to get the front bucket on my dk45 to roll back some more it is the stock tool carrier bucket.it just seems it could curl back a few more inches.also on one of the older post about turning up the hydrolic pressure on the dk45.also does any skid sterr atchments fit on the dk45 .thank you for your time.

 

[KiotiDave]

Hi Diesel,
If you have the American loader KL1590... there is a kit for increased rollback available. Part#1590-2035. This is for the DK45 with self leveling loader.
You should be able to order the kit from you local dealer.
It changes the pivot points locations to increase the rollback. It is not a drastic change, just an inch or two with a little more strength.
KiotiDave