DK65 Hydraulics stall at first startup

   / DK65 Hydraulics stall at first startup #1  

pinus

Member
Joined
Apr 2, 2007
Messages
36
I thought I had posted this and was following up chasing my problem. Its a 2003 DK65 that maybe 50% of the time when you first start it after sitting it takes a minute or two for what seems to be the pump to pickup fluid and be able to raise the loader, steer, or raise the 3 point. You can feel it pulse or lightly jump when it picks up and is ready. I changed filters with no luck. Some have suggested sucking air on the hose part of the line, possible o rings bad above the filters, and maybe other things related to tubes.

Any of you have suggestions or dealt with a similar issue?
 

Tractor & Equipment Auctions

FELLA TH800 HAY TEDDER (A51243)
FELLA TH800 HAY...
2008 Kenworth T300 T/A Knuckleboom Crane Truck (A50323)
2008 Kenworth T300...
Club Car Carryall 500 Electric Utility Cart (A51691)
Club Car Carryall...
2018 INTERNATIONAL 4400 SBA 4X2 SERVICE TRUCK (A51406)
2018 INTERNATIONAL...
2006 GMC C8500 Altec AM547 50ft Material Handling Insulated Bucket Truck (A50323)
2006 GMC C8500...
2016 Chevrolet Caprice Sedan (A50324)
2016 Chevrolet...
 
Top