PBinWA
Platinum Member
- Joined
- Jun 10, 2004
- Messages
- 906
- Location
- WA
- Tractor
- Kioti NX55, Mahindra 2615, Case 36CXB, Case W4, Volvo MC85C
The other big point to emphasise is that the new ACQ PT lumber is more corrosive so you need to make sure you are using the right flashing and hot dipped galvanized or stainless steel (preferred) hardware. Unfortunately, there isn't a lot of solid information on the subject.
I've heard that you can use copper flashing but that you have to be careful about the bolts used because a combination of the different metals along with the ACQ chemicals can cause accelerated corrosion.
The whole things a bit of a confusing mess for us lay people that just want to build (or in my case rebuild) a deck.
IMO - a fully detached deck is probably the safest and best for lowering your chances of water damage and ledger failure. The posts up against the side of the house may not be all that attractive.
I rebuilt my front deck last summer and just removed the ledger and went with a detached deck. My back deck is higher and has a basement door exit under it so I have to use a ledger for it.
In my books it's always best to over-engineer stuff. My building inspector neighbor commented that my front deck looked extremely over-engineered.
/forums/images/graemlins/grin.gif
(I took that as a compliment.)
I've heard that you can use copper flashing but that you have to be careful about the bolts used because a combination of the different metals along with the ACQ chemicals can cause accelerated corrosion.
The whole things a bit of a confusing mess for us lay people that just want to build (or in my case rebuild) a deck.
IMO - a fully detached deck is probably the safest and best for lowering your chances of water damage and ledger failure. The posts up against the side of the house may not be all that attractive.
I rebuilt my front deck last summer and just removed the ledger and went with a detached deck. My back deck is higher and has a basement door exit under it so I have to use a ledger for it.
In my books it's always best to over-engineer stuff. My building inspector neighbor commented that my front deck looked extremely over-engineered.
/forums/images/graemlins/grin.gif
(I took that as a compliment.)