One Acre Farm
Member
Can anyone explain the draft control lever?
Draft Control
- Thread starter One Acre Farm
- Start date
- Views: 1596
MicroPilot
Veteran Member
Draft control operates by sensing the amount of "pull" on a ground engaging implement. If while using such an implement the tractor happens to get stuck, the draft control will lift the implement over the obstruction.
This is mainly used for plowing operations, but is also sometimes useful when using a boxblade or scraper blade. When using draft control a constant ground speed should be maintained.
My owners manual advises to not enable this feature when using non-ground engaging implements, and unexpected movement of the lift arms could result.
Check your owners manual for details about how this feature is implemented on your tractor.
This is mainly used for plowing operations, but is also sometimes useful when using a boxblade or scraper blade. When using draft control a constant ground speed should be maintained.
My owners manual advises to not enable this feature when using non-ground engaging implements, and unexpected movement of the lift arms could result.
Check your owners manual for details about how this feature is implemented on your tractor.
smstonypoint
Super Member
- Joined
- Oct 13, 2009
- Messages
- 5,820
- Location
- SC (Upstate) & NC (Piedmont)
- Tractor
- NH TN 55, Kubota B2320 & RTV 900, Bad Boy Outlaw ZTR
It should be explained in your owner's manual, but here's an explanation.
http://www.tractorsmart.com/main/Tractor%20Three%20Point%20Lift%20Types.htm
Steve
