drive shaft seal?

   / drive shaft seal? #1  

FL_Jerry

Silver Member
Joined
Feb 14, 2006
Messages
130
Location
FL, Bay County
Tractor
YM 2000
I've been taking various items apart to service and inspect. I took my dash off my 2000BD to clean behind and tighten the decomp handle. I decided since I had the steering box almost exposed, I took it out and cleaned it/replaced gear oil. When I looked into hole where it mounts, I could see the clutch housing, shaft, and a small puddle of fluid where I think the shaft enters the transmission. So I'm not sure if it is something I need to get right on or wait. I also can't seem to identify the parts from the internal diagrams of the transmission. I don't see any loss in the hydraulic fluid using dipstick. Could this have come from when my vent was plugged?
Comments and suggestions appreciated.

Jerry
 

Tractor & Equipment Auctions

2005 CATERPILLAR 12H MOTOR GRADER (A51406)
2005 CATERPILLAR...
2011 Ram 1500 4x4 Crew Cab Pickup Truck (A50323)
2011 Ram 1500 4x4...
CAT 312C (A50854)
CAT 312C (A50854)
2015 Timpte Hopper Bottom (A50514)
2015 Timpte Hopper...
2017 Bomag BW90 AD-5 Vibratory Articulating Tandem Smooth Drum Roller (A50322)
2017 Bomag BW90...
2012 FREIGHTLINER M2 TANDEM AXLE DUMP TRUCK WITH A SNOW PLOW (A51222)
2012 FREIGHTLINER...
 
Top