Drum Mulcher Balancing

[willidav]

Does anyone have suggestions on where I can get a TMF Tech LS2150 drum mulcher balanced in the Mid Atlantic area?

 

[Rustyiron]

All I can think of is are you missing any cutters on the drum or are the bearings in good order.
Is this a Lamtrac machine?
Sorry I can't recommend a shop that would balance something that big, but there's got to be one somewhere. That's a expensive, primary component of an expensive machine that's not a disposable part!
Have you looked for a dealer?

 

[willidav]

It is a TMF Tech, who makes Lamtrac. I have not been able to find any dealers on the east coast. Is there a way to balance without the $4k computer device?

 

[willidav]

There is nothing as obvious as missing hammers. I tried taking all the hammers off but there is still a vibration. I did check the bearings as recommended in the manual (placing a long prybar under each side of the drum and lifting looking for any slop, and none).

 

[ConawayFarms]

Stihl or John Deere might have connections for mulcher balancing

 

[Rustyiron]

Any of the big brand dealers might be able to direct you to a service. Good luck, that's a frustrating problem.

 

[oldnslo]

Diamond mower or Fecon dealers might have a source for balancing that drum.