DX24E for DX26

   / DX24E for DX26 #1  

newred

Bronze Member
Joined
Aug 27, 2004
Messages
54
Location
N.B.,Canada
Tractor
CaseIH DX26
/forums/images/graemlins/cool.gif traded my DX24E yesterday for DX26 ! Wanted to add front end loader and not convinced 24E would be heavy enough loader for what I wanted. Like several things better about each tractor better though.

24E - pto enguagement on left
sensitrac ? auto 4wd
seems stronger - maybe side discharge
54 " deck takes alot less hp than new rear discharge 60 " deck
like the 2 pedals betterthe way they are on 24 than 26

26 - starts & sounds better
/forums/images/graemlins/cool.gif cruise control
60 " rear discharge deck does nicer job and follows ground better
caster wheels on front of deck
clutch seems to allow easier shifting of high / low nuetral ranges rather than just centering hst pedals


Will post picture later - tried out a few hours now dealer picked up to add loader
 
   / DX24E for DX26
  • Thread Starter
#2  
/forums/images/graemlins/cool.gif traded my DX24E yesterday for DX26 ! Wanted to add front end loader and not convinced 24E would be heavy enough loader for what I wanted. Like several things better about each tractor better though.

24E - pto enguagement on left
sensitrac ? auto 4wd
seems stronger - maybe side discharge
54 " deck takes alot less hp than new rear discharge 60 " deck
like the 2 pedals betterthe way they are on 24 than 26

26 - starts & sounds better
/forums/images/graemlins/cool.gif cruise control
60 " rear discharge deck does nicer job and follows ground better
caster wheels on front of deck
clutch seems to allow easier shifting of high / low nuetral ranges rather than just centering hst pedals


Will post picture later - tried out a few hours now dealer picked up to add loader
 
   / DX24E for DX26 #3  
I almost got a DX26, but opted for the extra weight and loader strength of the 29. I'm pretty sure the 26 would have been great, but I was lured into the 29 by the suspension/swivel seat and the 3 point parts, especially the extension link ends and the crank on the tilt adjustment. I find myself wishing I gotten the 33 now and then, but other than that I'm really happy with it as it approaches 50 hours.

I don't mow, but spend a lot of time using the loader. If you use a loader a lot, look into adding a grapple to the bucket. I have found mine to be incredibly useful, so much so that I wonder how I got along without it before. I also got the QA bucket. I haven't had any reason to take it off yet since I have nothing else to put on there, but a lot of guys here who have them swear by them. Think about adding either or both of these things to your loader before it's installed.
 
   / DX24E for DX26 #4  
I almost got a DX26, but opted for the extra weight and loader strength of the 29. I'm pretty sure the 26 would have been great, but I was lured into the 29 by the suspension/swivel seat and the 3 point parts, especially the extension link ends and the crank on the tilt adjustment. I find myself wishing I gotten the 33 now and then, but other than that I'm really happy with it as it approaches 50 hours.

I don't mow, but spend a lot of time using the loader. If you use a loader a lot, look into adding a grapple to the bucket. I have found mine to be incredibly useful, so much so that I wonder how I got along without it before. I also got the QA bucket. I haven't had any reason to take it off yet since I have nothing else to put on there, but a lot of guys here who have them swear by them. Think about adding either or both of these things to your loader before it's installed.
 

Tractor & Equipment Auctions

2020 INTERNATIONAL LT625 TANDEM AXLE SLEEPER TRUCK (A51222)
2020 INTERNATIONAL...
2013 INTERNATIONAL 4300 26 FT BOX TRUCK (A51222)
2013 INTERNATIONAL...
2012 MAXEY TRAILER MFG 100KW GENERATOR TRAILER (A50854)
2012 MAXEY TRAILER...
2005 OVERLAND TANK KILL TRAILER (A50854)
2005 OVERLAND TANK...
(2) ROLLS OF HD CHAIN LINK MESH WIRE (A50460)
(2) ROLLS OF HD...
Komatsu D39PX-24 Crawler Tractor Dozer (A49346)
Komatsu D39PX-24...
 
Top