john4153
Bronze Member
- Joined
- Jun 2, 2010
- Messages
- 72
- Tractor
- Case DX40
I finally bought a 2004 DX40, got it home, cleaned and waxed. So far, everything works. It is hydrostatic.
It has kind of an odd S/N HBA00066xx. Before purchase, I called CNH, and the service person found the number. He explained that when that tractor was produced, it was a new run , but they probably just used up the older serial numbers.
Anyway, I went to my local Case dealer to get an operator's manual. He could order one and his price seemed reasonable. The problem is that my serial number is not included in the span the manual covers, which begins with something like HBA0007xxx or higher. He could not find any listing for the earlier number. BTW, the loader and tractor numbers are consistent. The loader is an L160, which as best I can tell is not very common either. The CNH tech person said it was probably just a different vendor, but same as the LX116.
Does anyone know anything about the strange serial number or have access to that manual to see whether my tractor is covered? Does anyone use the TC40D or TC40DA manual for their Case? If so, which is closer?
Thanks.
John
It has kind of an odd S/N HBA00066xx. Before purchase, I called CNH, and the service person found the number. He explained that when that tractor was produced, it was a new run , but they probably just used up the older serial numbers.
Anyway, I went to my local Case dealer to get an operator's manual. He could order one and his price seemed reasonable. The problem is that my serial number is not included in the span the manual covers, which begins with something like HBA0007xxx or higher. He could not find any listing for the earlier number. BTW, the loader and tractor numbers are consistent. The loader is an L160, which as best I can tell is not very common either. The CNH tech person said it was probably just a different vendor, but same as the LX116.
Does anyone know anything about the strange serial number or have access to that manual to see whether my tractor is covered? Does anyone use the TC40D or TC40DA manual for their Case? If so, which is closer?
Thanks.
John
