I picked up a 40 year old miller econo twin welder dirt cheep. It was bought,installed and only used a few times for small projects. It looks new almost. I'll wire it up this weekend and give it a try. Anyone ever use one of these machines. I was told they were very common in the day. Any info will help. Thanks Andy
econo twin ac/dc miller welder
- Thread starter m35a2c
- Start date
- Views: 2430
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 26,998
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
B4 wiring it up, I'd take the cover off, clean all the contacts and blow the accumulated dirt out with compressed air. Just because it was used little don't mean it's 'like new'.....
It isn't.
Everything ages.
Including you.
It isn't.
Everything ages.
Including you.
That was the first thing i did when I got it home. I am an electrican in a power plant and deal with old equipment all the time. Some is good other stuff is junk. Just have to open it up and look for your self. Always check before You power it up. Andy
