Hi everyone,
Hoping someone here has a good understanding of the emax pto system.
When the pto button is turned on, no light comes on the dash and nothing from the pto. Was working fine when last used...approx several months/
Have checked the solenoid and that works fine, but from the two wires connecting to it, one has full voltage and the other has 4.5 volts. My understanding of solenoids is positive in and neg out.
Can someone tell what the switch at the lever selector actually does. I would have thought the dash switch sends power straight to the solenoid and the mid and rear pto selection is via the lever.
Have checked the fuses.
Would appreciate any help people can give, as I live in Fiji and have no dealer support for assistance.
cheers
Robert
Hoping someone here has a good understanding of the emax pto system.
When the pto button is turned on, no light comes on the dash and nothing from the pto. Was working fine when last used...approx several months/
Have checked the solenoid and that works fine, but from the two wires connecting to it, one has full voltage and the other has 4.5 volts. My understanding of solenoids is positive in and neg out.
Can someone tell what the switch at the lever selector actually does. I would have thought the dash switch sends power straight to the solenoid and the mid and rear pto selection is via the lever.
Have checked the fuses.
Would appreciate any help people can give, as I live in Fiji and have no dealer support for assistance.
cheers
Robert