I have a L3010GST. I purchased it with 286 hrs on it and have put about 50hrs on it. The Engine Intake/Combustion Air-Filter indicator light came on yesterday. The filter case had a tag that said next service was not due until 386 hrs. I cleaned the filter but the light still comes on when I bring the rpm's up over 1500. I can also hear and feel the engine bog down when the light comes on and the rpm's do not increase - at least I haven't pushed...
I have new primary and secondary elements on order.
A couple questions:
1. Will I damage the engine if I run it at <1500 rpm - as long as the light does not come on?
2. Is there anything else I should be checking that would cause the light to come on?
I have new primary and secondary elements on order.
A couple questions:
1. Will I damage the engine if I run it at <1500 rpm - as long as the light does not come on?
2. Is there anything else I should be checking that would cause the light to come on?