Exmark Belt twisted

   / Exmark Belt twisted #1  

kc5dlo

Gold Member
Joined
Mar 10, 2002
Messages
300
Location
East Texas
I was mowing the yard yesterday when a noise started. I shut the machine down to investigate and found the belt that runs from the PTO clutch to the deck was twisted several times between the fixed idler pulley and the deck. That caused the tension pulley to pull up and start rubbing on the frame. I am guessing that is what was making the noise. The belt is also frayed on the edges. I saved the old belt from last winter when I changed all the spindles, belts and pulleys so I can get back to work without any delay.
My question is what caused the belt to twist? My neighbor is speculating that the grass being taller than I normally let it get, put too much load on it and caused the twist. Any ideas?
 
   / Exmark Belt twisted #2  
Don't know, I have had them twist in the past, just untwisted and increased the tension a little and kept using the belt.
 

Tractor & Equipment Auctions

2024 Xpro Mini Dirt Bike (A50324)
2024 Xpro Mini...
2019 John Deere XUV560E Utility Cart (A53421)
2019 John Deere...
2020 MACK PINNACLE P164T DAY CAB ROAD TRACTOR (A51406)
2020 MACK PINNACLE...
2015 Kia Sedona Van (A51694)
2015 Kia Sedona...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2002 14ft S/A Utility Tilt Trailer (A51694)
2002 14ft S/A...
 
Top