Can some please help me? I want to add 2 extra hydraulic outlets onto my Kubota B2023. It has the joy stick for a future FEL. When I had my old Ford 2000 I cut the hydraulic pressure line running to the rear auxiliary and plumbed in a two spool valve and then returned back to the cut pressure line. Is that what has to be done to the little Kubota? Cut the pressure tube running from the pump to the joystick? If I were adding a back hoe, how would I tie into the hydraulics? My extra two rear cylinders should be no different than adding a back hoe. Are there existing plugged ports that can be tied into? Thanks for any advice. The B2023 is 2 years old.
Extra Hydraulics
- Thread starter Mai
- Start date
- Views: 524
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 13,300
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
You need to know where the pressure relief valve is that protects the pump is before you put it there.
If you don't get replies here, try this Forum: https://www.tractorbynet.com/forums/kubota-owning-operating/
If you don't get replies here, try this Forum: https://www.tractorbynet.com/forums/kubota-owning-operating/
