F935 engine trouble

   / F935 engine trouble #1  

dlbcheckmate

New member
Joined
May 16, 2009
Messages
5
Hello, great site ! I have a John Deere F935 with a Yanmar Diesel engine. I rebuilt the engine (new pistons, bearings, rings, injectors, glow plugs ect) after it started ok, I ran it about 1/2 hour or so and it quit. I was able to restart it but it does not seem to have full power. When I crank the engine over to bleed the fuel system it will actually slow down or stop cranking when you tighten up the line it resumes cranking ? Any ideas ?
 

Tractor & Equipment Auctions

2005 STERLING LT8500 SERIES MIXER TRUCK (A50854)
2005 STERLING...
2003 International 4300 Flatbed Truck w/ Liftgate - Inoperable - 7.6L DT466 Diesel Engine (A51039)
2003 International...
2012 Vermeer V500LEHD Vacuum T/A Towable Trailer (A49461)
2012 Vermeer...
2017 Dodge Ram 1500 4x4 Crew Cab Pickup Truck (A50323)
2017 Dodge Ram...
John Deere 960 Culitivator (A50514)
John Deere 960...
2017 Makita HM1307CB 35lb Demolition Hammer (A49461)
2017 Makita...
 
Top