Loader Farm king/buhler/allied model 95 FEL

[rick sheltra]

I need to know the correct way to hook up hydraulic hoses from my kubota b7100d to my buhler model 95 FEL
I have owned it for years and got used to it dumping tilting etc the way it was.
Well some of my children told me I had it wrong so they reconnected the hoses and moved the controls. I went to operate it and could not do it efficiently because of everything being different...what can I say I'm old!
So now 8 months later I am starting over so I thought why not find out how it's really supposed to operate.
I can not find any info about how it would operate. I wonder is there a standard? As an operator do you get in one piece of equip and it is the same as the next one? I don't know so I have come back to the best place to find out TRACTOR BY NET !
If someone could direct me to a place I could find out I would appreciate it. I found the manuals for model 95 but not for the controller.
Thanks happy holidays to all

 

[CalG]

I've got an Allied 195 set up on the Hurlimann
I did the valve myself. My way of thinking is that the element under control should move the same direction as the control lever. I have the boom control lever to the out side, away from me, with the bucket curl inside and near.

When I ask my wife to help position something by operating the tractor and loader. She thinks my logic is completely unrelatable. Oh Well.

 

[rick sheltra]

I've got an Allied 195 set up on the Hurlimann
I did the valve myself. My way of thinking is that the element under control should move the same direction as the control lever. I have the boom control lever to the out side, away from me, with the bucket curl inside and near.

When I ask my wife to help position something by operating the tractor and loader. She thinks my logic is completely unrelatable. Oh Well.

Hey Cal thanks for the reply.... so I was thinking pull the lever down bucket goes up push it forward and it goes down. Then curling bucket to the right outside is empty bucket and inside is curl it up. Does that make sense. When I was using it last summer I was getting pretty efficient then some young guys that were there told me I had the whole thing wrong,,,as soon as they switched it I was hitting everything as I had operated it a certain way for years. I figured maybe I should find out the standard position however I cant find any info on the hydraulics on the buhler model 95 fel. So I think the way you described is probably the best...thanks for taking the time to answer and have a happy holiday.