farmtrac 270d

   / farmtrac 270d #11  
agequipt said:
Some one asked lift on 5040 loader?

The origional spec was 1000lbs then up graded to 1200lbls at full height

no change in the physical machine just a PRV setting per Eng in Tarboro.

Thanks for the info.

Just curious. PRV = pressure relief valve, I assume.
Eng = ?
engineers?
 
   / farmtrac 270d #12  
I have a 270DTC that just turned over 200 hrs. The tractor has been very dependable, and is quite a workhorse. Only trouble I've had is sheered bolts in the front end loader brackets (I think this was mostly my fault for not checking them for tightness more often), and a broken clutch pedal return spring. I couldn't find a dealer with the spring in stock, but found one that worked at Home Depot for $1.25 I was supposed to have another year warranty on the tractor, but I'm not worried about it. I just replaced all the filters (oil, hydraulic, fuel and air) for less than $50.
 

Tractor & Equipment Auctions

2019 MMDI 14ft T/A Utility Trailer w/ Fuel Tank (A48082)
2019 MMDI 14ft T/A...
Land Honor Quick Attach Articulating Boom Brush Cutter (A50514)
Land Honor Quick...
Corn Reel (A50514)
Corn Reel (A50514)
Miles,26,126 (A50323)
Miles,26,126 (A50323)
DYNAPAC CA152PD PADFOOT ROLLER (A51242)
DYNAPAC CA152PD...
2013 Ford F-550 4x4 Ext. Cab Auto Crane 6406H 6,000LB Crane Service Truck (A50323)
2013 Ford F-550...
 
Top