fenders for hpx/xuv

[TOMMYHPX4X4]

anyone interested in giving a pair a try i mean not for free but when they done .what type would ya'll like better black or bling!bling! they would be the same size as the stock but just nade out of aluminum. i need some feed back on the fenders if not i'll just make a set for my hpx and that will be it.if not i'll make a pattern of the ones i make. the only diference in the ones i would make is i would come down further on the inside so mud wouldn't splash up on the engine or the belts for those ho don't have belt encolsures. i'm thinkin or ordering a set of them bootguards from deere and modifieying them and fixing them the right way i also have a reallyu heavy duty bumper made it was for the rtv but until i get a rtv to mount it to i have to mount it to the gator so it will be mounted to it in a few days.i still mainly only do rtv's but i am very limited as to what i can do until i get the 1100 it's comin but slowly.

 

[DaryleD]

Tommy,
I don't have one, but I just wanted to mention something to ya. You might want to use rubber bushings where they mount up, to minimize vibration noise. You have probably thought of this already ( given that you seem very smart in fabrication ), but I thought I would through that out just incase. Good luck! I hope you sell a ton!!
Daryle.

 

[TOMMYHPX4X4]

thanks for the idea it is better than mine . i was gonna cut some gastes out of some 1/4 rubber mat material i have and use it for a washer between the bolts but i think after reading your post i might look around to see what else is out there in the means of rubber washers.

 

[DaryleD]

Tommy,
If you get them on your machine, take pics so we can see them. I can't wait to see your design.
Daryle.

 

[TOMMYHPX4X4]

oh trust me i'll post pictures 'lol i'm getting kinda backlogged with the rtv's and they come first so after i get them out i'll do some work on the fenders again. but they are comin.