steve miggler
New member
the pto keeps kicking out of gear when I try to use it. whats my fix thanks
fix pto on ford jubilee
- Thread starter steve miggler
- Start date
- Views: 2498
dawzie
Bronze Member
- Joined
- Dec 15, 2008
- Messages
- 88
- Location
- Marlboro,NY
- Tractor
- '50 8N, '67 & '71 ford 2000, 2010 Bobcat CT-235 TLB
Welcome to TBN
Need a little better description of the problem. Does the engagement lever feel the same as in the past? Does it kick out of gear with nothing connected, with anything connected, just under heavy load? Have you checked the oil levels? Does the transmission feel the same?
Need a little better description of the problem. Does the engagement lever feel the same as in the past? Does it kick out of gear with nothing connected, with anything connected, just under heavy load? Have you checked the oil levels? Does the transmission feel the same?
whitedogone
Gold Member
The pto was proably jambed by some implement. There is a snap ring that holds the pto shaft bearing in place. The housing will get damaged and the snap ring will come off. It's a easy fix. Just make sure to "fish" out all the pieces that may be in the alxe housing.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
yep.. could be bad snapring.. or just plain bad bearing.. if there is in / out movement on the pto shaft.. it will walk itself out of engagement.. and chey up the sliding splined collar int he process. fix this one sooner than later.
post back if you find any in / out or up/down play in the bearing/carrier.
soundguy
post back if you find any in / out or up/down play in the bearing/carrier.
soundguy
