Flow head same for 54C/54D and 62C/62D deck?
- Thread starter purpony
- Start date
- Views: 1431
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,563
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
I've worked with a lot of decks, and have no idea what a flow head is?
So I am confused too.
jdparts has the part numbers for both decks so you should be able to find out (but nothing comes up that is called a "flow head").
So I am confused too.
jdparts has the part numbers for both decks so you should be able to find out (but nothing comes up that is called a "flow head").
glc24
Platinum Member
I've worked with a lot of decks, and have no idea what a flow head is?
So I am confused too.
jdparts has the part numbers for both decks so you should be able to find out (but nothing comes up that is called a "flow head").
:confused2: me too.
Could he be talking about the power flow bagger system?
Purpony,is it the blower housing you're referring to?
Greg
Last edited:
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,563
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
If it is the blower housing, then there appears to be a different housing for the 54C/54D than for the 62C/62D and different drive belts.
glc24
Platinum Member
Beenthere you're right. I think there are even more parts different.
When I switched from 54C to 62D,the pic didn't change so I assumed (you know what that gets you) they were all the the same parts. Seems not so.
Greg
When I switched from 54C to 62D,the pic didn't change so I assumed (you know what that gets you
) they were all the the same parts. Seems not so.Greg
