Flow reducers

[jdonovan]

I have a new-to-me snow plow that I've gotten setup for use on the skidsteer QA on the loader.

The problem I'm finding is that even at idle speed the 3rd function loader valve is moving the plow WAY to fast. I've picked up a pair of flow reducing valves to put on the lines.

I was wondering about putting the flow valves on a pair of QD's so I could use them with other implements vs. putting them on the plow setup only.

Thoughts?

 

[olde man]

there are many pressure and flow control valves as long as yours is designed to be in-line and permit return flow you should be good

 

[jdonovan]

Yes, the ones I have are inline, and have no resistance to return flow.