Fluids?????

   / Fluids????? #1  

Carl1

New member
Joined
Jun 30, 2006
Messages
12
Location
Dayton,Ohio
Tractor
IH 574 and IH424,Ih3414 loader
Bought a old tractor. in the process of changing fluilds. Can you use the same fluid in the tranny and fel??

thanks
 
   / Fluids????? #2  
Carl,

I think we could all give you a better idea if you tell us what kind of tractor you have. Most newer ones use the same, in fact they use the same resevoir. But the older ones I can't tell you for sure.

murph
 
   / Fluids?????
  • Thread Starter
#3  
Sorry,
IHC 3414 international loader built in the 60's

thanks
 
   / Fluids????? #4  
Yes the 414 should use Hytran or the equivalent in both the loader and the tranny. I use the Premium UTF from Tractor Supply, as long as it meets the Hytran specs it should be fine.
I suspect you tractor uses a common sump in the tranny anyway, my 1968 2444 does.
You will have about 3 drain plugs on the bottom to pull, and possibly one on the rear of the lift box assembly, depending on your configuration.
 

Tractor & Equipment Auctions

1994 LUFKIN (A50854)
1994 LUFKIN (A50854)
2023 John Deere 8R410 MFWD Tractor (A51039)
2023 John Deere...
2017 Ram 5500 Valve Placer Bucket Truck with Versalift STP36NE - 41FT Working Height, Low Miles (A51039)
2017 Ram 5500...
2011 John Deere TX Gator 4x4 Utility Cart (A49461)
2011 John Deere TX...
PORTER CABLE 150 PSI AIR COMPRESSOR (A50854)
PORTER CABLE 150...
2025 Swict 72in Bucket Skid Steer Attachment (A50322)
2025 Swict 72in...
 
Top