cguth
New member
Hopefully someone can guide me in the right direction. 3 point worked one day and not the next time i got on the tractor. Cleaned filters changed fluid and no change. Rebuilt hydraulic pump to fix low pressure issue. Started it up and it blew the pressure line off that goes from the pump back to the rear of the tractor. I put that back on and pulled the 3 point cover and cylinder. I dont know where to start. I can move the cylinder by applying air to the correct port. I dont know the hydraulic flow so i dont know what else to look for. Im very mechanically inclined so any and all help would be appreciated. Forgive all the typos im on my phone.
