my dad has a 6000 uses it for blowing snow and mowing grass. it has a bad leaking front trans seal it still works ok would it be worthwile to replace the seal? im sure some damage has been done to the selct o speed. the brakes and 3 point arent working, the power steering is. I think they all run off the hyd pump on front? is there a place online where I can see a hyd schematic? any advice would be appreciated. how hard is it to fix a select o speed?
oliver28472
Veteran Member
I guess this is the 6000 Commander? You might get more responses if you repost here in the vintage section. Another site is ytmag.com. If the select-o-speed is damaged it could be expensive to repair and hard to find parts for. Good luck.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Hit the new holland web site.. you can then search for parts and get exploded diagrams.
a MANUAL would be a big help
So far sounds like you go a good engine.. and everything from there back is iffy... gotta love the SOS.. and unfortunately.. for that tractor.. sos was the only trans option... not like you can swap an 8spd into it like you could do with a 5000.. etc.
soundguy
a MANUAL would be a big help
So far sounds like you go a good engine.. and everything from there back is iffy... gotta love the SOS.. and unfortunately.. for that tractor.. sos was the only trans option... not like you can swap an 8spd into it like you could do with a 5000.. etc.
soundguy
