hey everyone, i am looking at buying a ford gt 75 diesel runs great but the mower deck is not coming with it does anyone know where i can get one, preferable in canada but will go to the states as well. Thanks i will get some pictures of it on here soon.
ford gt 75
- Thread starter Bronn
- Start date
- Views: 10063
alvanko
Gold Member
- Joined
- Mar 10, 2002
- Messages
- 398
- Location
- Hinckley , Ohio
- Tractor
- Yanmar YM186D & Ford LGT14D Dixon Z BX2200D Kubota
Best of luck. I think the deck has been discontinued and is no longer availlable. You'll need to watch e-bay etc. . . .
ampa
Gold Member
- Joined
- Feb 9, 2009
- Messages
- 450
You could buy a 3pt finish mower like I had to do on my gray market ISEKI...implements are universel and can be made to fit....unless your tractor don't have a PTO shaft..although I needed only a 4' I ended up with a 5' (60")sort of an over kill....but the price was right so I bought it and rebuilt it.....cuts really nice and faster than my little rider...what part of Ontario are you? I also live in Ontario ....Ampa 
jinman
Rest in Peace
- Joined
- Feb 23, 2001
- Messages
- 21,059
- Location
- Texas - Wise County - Sunset
- Tractor
- NHTC45D, NH LB75B, Ford Jubilee
There is quite a bit of info on Ford lawn tractors at this forum on Yahoo.
Jacobsen-Ford Forum
EDIT: On second thought, that forum doesn't have a lot of info on your tractor. However, if you go to Messicks.com and look at their New Holland parts section, you can type in GT75 as a search and find full parts diagrams for your GT75. There is even a whole mowing deck available as a replacement for the original 48" deck. It's 44" wide and. . .hold your breath. . .a bargain at just over $3000.
Jacobsen-Ford Forum
EDIT: On second thought, that forum doesn't have a lot of info on your tractor. However, if you go to Messicks.com and look at their New Holland parts section, you can type in GT75 as a search and find full parts diagrams for your GT75. There is even a whole mowing deck available as a replacement for the original 48" deck. It's 44" wide and. . .hold your breath. . .a bargain at just over $3000.
Last edited:
ampa
Gold Member
- Joined
- Feb 9, 2009
- Messages
- 450
Good suggestion....shipping something like a complete belly mower to Ontario Canada would out weigh the total cost of the unit to fit this Ford GT 75..... just my 2 cents.....Ampa.....
jimdiesel1
Bronze Member
- Joined
- Jun 27, 2005
- Messages
- 64
Since that was built by Toro, ask at the local Toro dealers, much more likely to have a deck. Swing by the NH dealer to get some paint and you will be all set.
alvanko
Gold Member
- Joined
- Mar 10, 2002
- Messages
- 398
- Location
- Hinckley , Ohio
- Tractor
- Yanmar YM186D & Ford LGT14D Dixon Z BX2200D Kubota
That unit was actually made by Shibaura for Ford. Same as my LGT14D except 2 extra horse power and a sloped hood. I think it has "power steering" too which would be a nice feature. Some parts are scarce to non-existant. I'm very happy with my LGT14D. Great cut wih plenty of power.
