My ford 3000 gas has a lift propleam the lever to raise and lower the 3rd arms is so stiff i can variley move it up and down . i thought that it was froze on the shaft but i took all of it off by hand it wasent frozen to the shaft now i think it must be in the inside . i was wondering if anyone had a diagram of the lift cover and how to remove it and if this was a thing that a shad tree machanic can do . thanks alot for the help
ford lift propleam 3000 gas
- Thread starter timtaylor
- Start date
- Views: 1455
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
your parts manual has a diagram, as well as the cnh website parts section.
do you have a service manual?
soundguy
do you have a service manual?
soundguy
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
yes, please re-read my previous message.
soundguy
soundguy
