Ford Workmaster 601 12V Conversion

[CharCur]

Just bought another project which is a Ford Workmaster 601 & going to convert to 12V. Can anyone tell me if the Fuel Gauge will have to be replaced also if converted to 12Volts. Present fule gauge does not work & have not took time to find out why, but wanted to know if a new gauge will be required beforehand. I am pretty mechanical minded & have electrical background

 

[Soundguy]

yes, you can get a gauge and sender for 12v.. I know ytmag carries them.. sure plenty of other places do as well.

here's a listing from walts tractor parts:

Gauges/Sending Unit/Tachometer Cable

UF43610 Fuel Gauge--12 Volt--Replaces 310949
Replaces 310949 4 cyl. 12 volt
Fits: 601, 701, 801, 901, 2000-4 Cyl., 4000-4 Cyl.


Price: $37.75

UF43460 Fuel Tank Sender Assembly--Replaces 310938 and 310939
Gas or diesel. 6 or 12 volt.
Fits: 601, 701, 2000 4 cyl. (1958-64)
Replaces numbers 310938 and 310939.


Price: $39.75

they have stewart warner for about 2x the $$ as well.

I chose walts as they were the first on my favorites list. as I mentioned. PLENTY of places cary the parts. I've bought from Ytmag and walts with 100% satisfaction many ties over.

soundguy