Backhoe Frame mounted backhoe on L2850

[Ken Cunningham]

Im thinking about buy this tractor with fel and backhoe. What is involved in taking the backhoe off and putting a 3pt on to use scrapblades and other attachments. If any one knows a ballpark figure on the cost and availability of a complete 3pt setup on a tractor this old, I sure would apprectiate the help. thanks

 

[wushaw]

Basically if it is a subframe BH mount then it is just two pins and two hoses (If connected to tractor hyd) that need to be connected together to keep from dead heading the hyd pump.
If PTO pump then just pull pump off before moving tractor fwd.

There are a few more details but that is the quick and dirty of it.