Front driver side drive pin snap

[mffarmall]

Got the parts will post when done or having problems. Mostly thinging will have problems.

 

[kyspartan]

be careful with jm parts had them stiff me for a brake light switch and gasket lip for a breather

 

[mffarmall]

I got my stuff from affordable tractors link up there. I also got some shirts for rags or to cloth some homeless guy. Great recycling idea.

Before I start to rebuild axle. I need to get this the first spacer that has grooves on the new axle. I had to heat it and bang on it to get it off. Questions are these:

1. What sits on these spacer/baring, a gear, seal, another metal part? mostly, if this piece has some small nicks does it cause problems?

2. How do I press it onto new axle, it is getting stuck on the gearing of the shaft. Do I need to cut a hole in piece of wood then put pipe on the wood and bang on pipe until it sits in place or in heating could it have changed the size? A new peace should not get stuck?

see pictures, thanks for your help.

 

[Affordable]

Give me a call if you need some help,the bearing press's onto the driving shaft,you need to have a bearing press or take to your local auto parts store they can press it on for you,do not heat it.When the bearing press's on the shaft over the 2-1/2 moon keepers it makes a popping sound thats what holds the driving shaft on.Can't see the nicks you are talking about but unless they are where the seal rides it should be fine

Tommy
Affordable Tractor Sales
"Your Jinma Parts Superstore"
Home of compact Jinma, Foton, and Koyker Tractors and Parts, Wood Chippers, Backhoes - Affordable Tractor Sales Company

 

[mffarmall]

Thanks for that information. Do I put all the parts together then have them pressed onto the axle? I'm using the steps that I used to take things apart for reference. But when something falls apart it is hard to know the steps. And the parts manuel can only do so much. Thank god for you guys.

 

[mffarmall]

All done and everything is working great. As of today, no noices, no leaks, no stuck in place other then loader was iced to the ground it has been so long. But I'm going to take it easy and greace everything. Then it's back to using my tractor for work then working on my tractor. Put in pictures of this.

 

[mffarmall]

Drove around and checked everything out. I greased all the front zirks. I put to much 80-90 and needed to draw some out. They really put the axle plug in a really bad spot. Took it from the none replaced side. It was black and thick then it started to get smoother and more light brown. I need to change all of my oils this summer.

But I have no leases or binds. I moved 3x8 bale 1/4th used with no problems. I also drove down the road slowly.