Front loader/oil question

   / Front loader/oil question #1  

Anonymous Poster

Epic Contributor
Joined
Sep 27, 2005
Messages
29,678
I need some help!! I have a Bolens G184/Iseki with a front loader, that works slow very slow and the 3 point is slow also. Both have alot of lifting power. My Questions is?? The hydraulic system/transmission oil is 90 weight. Can/should i change to hydrauic fluid?
 
   / Front loader/oil question
  • Thread Starter
#2  
Shemp, look in the Yanmar Forum. I asked the question there and a guy responded and siad he changed to hydro fluid and works great now.

Should be on first page. Later
 
   / Front loader/oil question #3  
I have a 1986 Iseki( Bolens G214) with a front end loader and run universal hydraulic, tranmission fluid in it. The tractor manuel says to put in 80-90 gear oil. However, if the tractor has a hydraulic pump in the transmission for the loader you go to hydraulic/ trans fluid which is an upgrade of the basic tractor. The FEL manuel notes this if the hydraulic pump is inside the transmissiom as opposed to a PTO pump. Bolens would import the tractor, paint it up and add american/canadien made FEL and /or, in my case, a back-hoe. Obviously, the manuel is for the basic non hydraulic pump tractor.
 

Tractor & Equipment Auctions

2007 Amkus Rescue System (A50322)
2007 Amkus Rescue...
John Deere 6105E Tractor, 105HP, 4WD, Suspension Seat, A/C, 3 Rear Remotes (A51039)
John Deere 6105E...
TOYOTA 7FGCU25 LP SIT DOWN FORKLIFT (A50854)
TOYOTA 7FGCU25 LP...
2018 VOLVO VNL SLEEPER (A51222)
2018 VOLVO VNL...
2010 International 4300 2,000 Gallon Water Truck (A49461)
2010 International...
DRIVELINES (A50854)
DRIVELINES (A50854)
 
Top