Front Loader Swap

[ags1517]

Has anybody got any thoughts how difficult it would be to put a front loader off a Kubota L345DT onto an Iseki 3110. The loader is complete with all brackets etc from the Kubota. Before you ask the loader is dirt cheap!!!
Thank You

 

[slowrev]

I would recommend measuring/comparing the mounting points on both tractors. You might find a width difference which would make the swap inpossible or you might find a boltup situtation or just make some adapter brackets.... Good luck a cheap loader is always nice. Of course if the loader is cheap enough, buy it and resell it if it does not work /forums/images/graemlins/smile.gif

 

[Maxfli]

I put a used Loader on a Bolens Iseki TX1500, the guy I bought it from also had it on a similar machine. He told me that it was a Kubota Loader off a B7100, but I can find no Model numbers anywhere. This things been around a bit, but works great. There has been no modifications to the mounting bracket, and everything bolted right up for me.
For what its worth.