Front wheel leak Kubota L245DT

[Jjpbe]

Hi ,
I have a Kubota L245DT which has a small leak on the left front wheel.
Which seal(s) do have to replace and where can I get them. I have the parts Manual but it is not clear to me which parts need repair.
Anyone who did replace this before? Any help is very much appreciated!
Thanks,
Joe

 

[repete]

Can you send a pic of where the leak is?

 

[Jjpbe]

Hi repete , can’t send a pic now.
the leak is where the upper part of the front knuckle is pivoting on the lower part. I can see it’s oily between the two parts and from there the oil is leaking downwards.

thanks
Joe

 

[azbinder]

If it is leaking between the upper and lower pivots, you will need item #18-35226-43490 seal. Plus 32448-99150 gasket, 37650-43470 dust seal, 04811-50900 o'ring. Also 37720-43550 o'ring and 37650-43530 seal. These are the items that I usually used when I was at the dealership.

 

[Jjpbe]

Thank you azbinder for the information!

 

[azbinder]

When you disassemble and reassemble, make sure you keep any shims in the SAME place that they came from.