Frontend Loader for YM220D

[Gjamtrac]

Does anyone know of a loader manufacturer that makes a bucket loader for the YM220D?

 

[jeff9366]

Here you go......

Front-End Loader - Compact Tractor Aftermarket Loader Suppliers

Often we see threads like this: Considering Kubota M4800 - where to get a loader? I'm considering an in-family purchase of a 2005 Kubota M4800 but I'm completely new to tractors. Any ideas on where I could get a loader for it? Thanks. Let us compile a comprehensive list of aftermarket...

www.tractorbynet.com

 

[bmaverick]

Does anyone know of a loader manufacturer that makes a bucket loader for the YM220D?

Per the Tractor Data, the YFL-875 is mentioned. However, that is W-R-O-N-G.
TractorData.com Yanmar YM220 tractor attachments information

The correct FEL is the YDL200. Fits the following,
YM180(D)
YM187(D)
YM220(D)
YM226(D)

The Bush Hog kit fits other loaders too,
BUSH-HOG 1846QT FRONT END LOADER

Bracket Kit P/N 25H41897 (For Yanmar YM 220, YM 220D, YM 226, YM 226D)

Parts list and parts diagram for a Bush Hog 1846QT Front End Loader Parts 1846QT Front End Loader Bracket Kit P/N 25H41897 (For Yanmar YM 220, YM 220D, YM 226, YM 226D) assembly.

store.germanbliss.com

 

[Gjamtrac]

Per the Tractor Data, the YFL-875 is mentioned. However, that is W-R-O-N-G.
TractorData.com Yanmar YM220 tractor attachments information

The correct FEL is the YDL200. Fits the following,
YM180(D)
YM187(D)
YM220(D)
YM226(D)

The Bush Hog kit fits other loaders too,
BUSH-HOG 1846QT FRONT END LOADER

Bracket Kit P/N 25H41897 (For Yanmar YM 220, YM 220D, YM 226, YM 226D)

Parts list and parts diagram for a Bush Hog 1846QT Front End Loader Parts 1846QT Front End Loader Bracket Kit P/N 25H41897 (For Yanmar YM 220, YM 220D, YM 226, YM 226D) assembly.

store.germanbliss.com

Actually Yanmar had both frontend loaders made.
The YFL was the standard loader and the YLD was a light duty loader. The materials were not as heavy duty, including the bucket and it had smaller diameter cylinders, and only one dump/retract cylinder mounted in the center of the bucket.

 

[bmaverick]

Actually Yanmar had both frontend loaders made.
The YFL was the standard loader and the YLD was a light duty loader. The materials were not as heavy duty, including the bucket and it had smaller diameter cylinders, and only one dump/retract cylinder mounted in the center of the bucket.

So did you find a loader for your machine then?