Searay45DB
New member
I decidednto put a block heater on for this winter. After last winter, I'm not taking any chances. This turned into quite the little fiasco.
After finally finding the frost port and getting the plug out, I inserted the heater, moving it back and forth to center as best as possible. I screwed in the retainer screw on the front and am having trouble gettin the heater to mount tight enough to hold the anti-freeze in. I loosened the screw and cant get the thing out. It's flush but you can still rotate it. If I screw it in anynfarther, it pops out. Suggestions would really be appreciates.
Thanks!
After finally finding the frost port and getting the plug out, I inserted the heater, moving it back and forth to center as best as possible. I screwed in the retainer screw on the front and am having trouble gettin the heater to mount tight enough to hold the anti-freeze in. I loosened the screw and cant get the thing out. It's flush but you can still rotate it. If I screw it in anynfarther, it pops out. Suggestions would really be appreciates.
Thanks!
Last edited:
