GC 2310 with Carry All

[Airic]

Bought a Tractor Supply Carry All (1000 lb) for my tractor and the bottom links are set to high on the carry all. I only get about 4" of lift. This is not sufficient when you are lifting a heavy load and get deflection and some linkage play. Its a drag, literaly. Anybody else have this type of issue and how did you fix? Because I don't have welder I'm thinking of just drilling some new holes lower on the frame and use a rod for a pin from one link to the other. Think this is sufficient?

 

[buckwheat]

If you can't shorten the top link, I'd say drill new holes down low, but watch that you don't end up binding the top link with its new geometry.