Backhoe GC 2610 Backhoe Control Valve (Nimco) Problems

   / GC 2610 Backhoe Control Valve (Nimco) Problems #1  

amwood

New member
Joined
Jun 12, 2016
Messages
10
Location
Steamboat Springs, CO
Tractor
Massey Ferguson GC2610
Just went to reattach my CB05 backhoe after it has sat for a few months. My FEL is working and I hear the pump and see the hydraulic lines moving. However nothing on the hoe works. It looks like i have several leaks and the worst seems to be on the right hand joystick at the bottom of the control valve. My guess is that is stopping everything working.
How difficult is is too go through and do a rebuild, or does anyone have a recommendation on a shop that I can send the Nimco controller to to get rebuilt and checked out ?

Thanks
 
   / GC 2610 Backhoe Control Valve (Nimco) Problems #2  
Make sure you don't have the hoses between the backhoe and tractor crossed - its easy to do by accident.
 

Tractor & Equipment Auctions

2023 Bobcat T770 Skidloader (RIDE AND DRIVE) (LIKE NEW) (A50774)
2023 Bobcat T770...
2017 TRAILSTAR END DUMP TRAILER (A50854)
2017 TRAILSTAR END...
1986 ASPT 30ft S/A Pole Trailer (A49346)
1986 ASPT 30ft S/A...
Ditch Witch 6510A Trencher - Deutz Diesel, Backhoe, Cable Plow, Front Blade (A51039)
Ditch Witch 6510A...
INGERSOLL RAND G40 GENERATOR (A50854)
INGERSOLL RAND G40...
2014 VOLVO VNM DAY CAB (A51222)
2014 VOLVO VNM DAY...
 
Top