GC2310 Warranty Work

   / GC2310 Warranty Work #1  

madhatter

Gold Member
Joined
Jun 25, 2006
Messages
251
Location
Sherwood Park,Alberta,Canada
Tractor
2015 Massey GC1710
Hi,

Taking my 2006 unit in for warranty work for some minor leaks and in my opinion excessive hoe pin slop. Are they any updates I should get them to perform or anything else anyone can think of ? After the warranty is toast, the bills can get expensive, so I want to them to perform anything can now instead of on my tab later. Hopefully there is a seat update as I think the design is terrible and find that when it is in the normal forward position is not very solid from left to right.... I believe they have a 2 year warranty ( although I was told 3, but pretty sure it is 2 ) , so I though I would get it in before next years work (play) season begins.

Thanks guys....
 
Last edited:
   / GC2310 Warranty Work #2  
Take off the left side plastic engine panel and check the lower rad hose for any signs of rubbing from the throttle cable and linkage.
 
   / GC2310 Warranty Work #3  
I can't help on what to check on (but maybe something about a guard for your filter?), but about warranty time... Models from this year started a 3 year warranty, I don't think that is for older models (boy would that be nice to get that extra year, mine was up in September)... BUT if your dealer thinks yours is in the 3 year then don't say anything ;)
 
   / GC2310 Warranty Work #4  
I have an older 2310 and they told me (after a year), the FEL and HOE only were 1 year warranty, and the tractor was 2 years. I was disappointed because I was under the impression it was 2 years for everything. I Don't know what the current offer is but, don't be surprised if they tell you the warranty is less for the attachments.
1. Check both radiator hoses: A. for the hole from the throttle cable, and B. for excessive rubbing along their routing.
2. On some units the hydraulic hoses are not run along the inside of the right rear tire properly resulting in wear from tire rub.
3. check the seat for tears.
These are commonly covered by warranty.
 
   / GC2310 Warranty Work
  • Thread Starter
#5  
MrSteve said:
I can't help on what to check on (but maybe something about a guard for your filter?), but about warranty time... Models from this year started a 3 year warranty, I don't think that is for older models (boy would that be nice to get that extra year, mine was up in September)... BUT if your dealer thinks yours is in the 3 year then don't say anything ;)


Mine is a mid 2006 model, sure would be nice if it was a 3 year warranty. How would I find out ? My dealer I bought it from are knobs, so maybe phone Massey ??
 
   / GC2310 Warranty Work #6  
I guess you could call MF, but like I said it started with this years models (2008s?), I think in August.
 

Tractor & Equipment Auctions

John Deere Hsld 2510 H Nh3 Applicator (A50514)
John Deere Hsld...
1.5 Rolls of Red Brand Barb Wire (A50515)
1.5 Rolls of Red...
2018 FREIGHTLINER M2 26FT NON CDL BOX TRUCK (A52141)
2018 FREIGHTLINER...
Glenco Disk Chisel (A50515)
Glenco Disk Chisel...
2022 BARFORD TR8036 MOBILE SCREEN (A51242)
2022 BARFORD...
2019 CATERPILLAR D6 LGP HI TRACK CRAWLER DOZER (A51242)
2019 CATERPILLAR...
 
Top