GC2400 No Start

   / GC2400 No Start #1  

Kovats

New member
Joined
May 15, 2010
Messages
5
Location
Goderich Ontario Canada
Tractor
Massey Ferguson GC2400
My new GC2400 has been a dream until today. It does not turn over when the key is turned. The obvious things like levers in neutral and fuses have been checked. I have power to all lights and to the ignition system but the starter does not engage. A little strange for 104 hours...:confused:
 
   / GC2400 No Start #2  
My new GC2400 has been a dream until today. It does not turn over when the key is turned. The obvious things like levers in neutral and fuses have been checked. I have power to all lights and to the ignition system but the starter does not engage. A little strange for 104 hours...:confused:

PTO switch is off? Seat switch problem maybe??

df.
 
   / GC2400 No Start #3  
Ditto.... I'd definitely be checking all the interlock switches: seat, PTO, Hi-Lo-neutral, etc. Had that happen to me once- it was the hi-lo selector; it wasn't quite all the way in neutral.
 
   / GC2400 No Start #4  
The Wire under the Seat got pinched on my GC 2410 and it sounds very simular to the problem you are experiencing, so be sure to check if that may be an issue.
 

Tractor & Equipment Auctions

John Deere Z930M (A50121)
John Deere Z930M...
Excavator Bucket (A50514)
Excavator Bucket...
2021 Ford F-150 XL (A50120)
2021 Ford F-150 XL...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2018 Ford Explorer AWD SUV (A51694)
2018 Ford Explorer...
2016 Dodge Charger SRT Hellcat Sedan (A50324)
2016 Dodge Charger...
 
Top