GC2400 No Start

   / GC2400 No Start #1  

Kovats

New member
Joined
May 15, 2010
Messages
5
Location
Goderich Ontario Canada
Tractor
Massey Ferguson GC2400
My new GC2400 has been a dream until today. It does not turn over when the key is turned. The obvious things like levers in neutral and fuses have been checked. I have power to all lights and to the ignition system but the starter does not engage. A little strange for 104 hours...:confused:
 
   / GC2400 No Start #2  
My new GC2400 has been a dream until today. It does not turn over when the key is turned. The obvious things like levers in neutral and fuses have been checked. I have power to all lights and to the ignition system but the starter does not engage. A little strange for 104 hours...:confused:

PTO switch is off? Seat switch problem maybe??

df.
 
   / GC2400 No Start #3  
Ditto.... I'd definitely be checking all the interlock switches: seat, PTO, Hi-Lo-neutral, etc. Had that happen to me once- it was the hi-lo selector; it wasn't quite all the way in neutral.
 
   / GC2400 No Start #4  
The Wire under the Seat got pinched on my GC 2410 and it sounds very simular to the problem you are experiencing, so be sure to check if that may be an issue.
 

Tractor & Equipment Auctions

2024 JOHN DEERE 331P-TIER SKID STEER (A51246)
2024 JOHN DEERE...
2000 INTERNATIONAL 9200 (A52472)
2000 INTERNATIONAL...
1995 BEALL TRAILER FUEL TRANSPORT PUP TRAILER (A52472)
1995 BEALL TRAILER...
2019 Chevrolet Malibu Passenger Car, VIN # 1G1ZC5ST5KF136071 (A51572)
2019 Chevrolet...
2018 KENWORTH T680 TANDEM AXLE SLEEPER (A52576)
2018 KENWORTH T680...
New Wolverine 3pt Receiver Hitch (A53002)
New Wolverine 3pt...
 
Top