GC2400 No Start

   / GC2400 No Start #1  

Kovats

New member
Joined
May 15, 2010
Messages
5
Location
Goderich Ontario Canada
Tractor
Massey Ferguson GC2400
My new GC2400 has been a dream until today. It does not turn over when the key is turned. The obvious things like levers in neutral and fuses have been checked. I have power to all lights and to the ignition system but the starter does not engage. A little strange for 104 hours...:confused:
 
   / GC2400 No Start #2  
Can you hear the fuel pump running? Sounds like constant clicking. Have you checked your lever linkage to see if it is bound? PTO is in neutral?
 
   / GC2400 No Start
  • Thread Starter
#3  
Today I went out and turned the key and to my surprise, it started right up.
I am not certain that a couple of comments that I had made about Tiger Woods earlier in the day were some Karma coming back to pay me what I was owed. I am also a mechanic and this one has still got me stumped. I am going to continue to check all connections and cross my fingers. Thank you for your reply.
 

Tractor & Equipment Auctions

2014 BOMAG BW 213 DH-4 (A52472)
2014 BOMAG BW 213...
2024 JOHN DEERE 6155M LOT NUMBER 9 (A53084)
2024 JOHN DEERE...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2014 Dynapac CC4200 Tandem Vibratory Roller (A52748)
2014 Dynapac...
PORTABLE INDUCTION HEATER (A52472)
PORTABLE INDUCTION...
2009 International 7400 Chassis Truck, VIN # 1HTWGAAR89J160632 (A51572)
2009 International...
 
Top