GCxxxxTLB Owners. How do you stow your Hydraulic Hoses

TheRealBuzz · Mar 28, 2010

I'm having trouble finding a good way to keep my hoses stowed away while the BH is not attached.

How do you route them so they're secure and out of the way of the 3pnt and rear PTO operations?

irvingj · Mar 30, 2010

Since I don't --as yet-- have any 3PH attachments, I've removed the 3PH altogether (a la Kubota, I guess!

); however, I've experimented with hose-routing options....

At first I tried just looping the return line over the fill cap neck; later I just went around the bungee and then connected, so it would stay up. The "free" line I tucked up onto the top of the HST. So far, so good, but I had considered installing some clips if, I were going to use the 3PH.

TheRealBuzz · Apr 5, 2010

Here's what I rigged up for my 2410. I used a good ol' cotter pin and sandwiched it between the toplink mount and the oil fill mount using the existing hardware.

The return line has a loop on it that gets hooked on first then the power lines snap in on top.

Works like a charm!