OP
Anonymous Poster
Epic Contributor
- Joined
- Sep 27, 2005
- Messages
- 29,678
I emailed King Kutter and they replied saying there was an error in their first email. They said to use 90W. Thanks for all of your inputs!
Tiller gear oil for tiller
- Thread starter Anonymous Poster
- Start date
- Views: 52363
OP
Anonymous Poster
Epic Contributor
- Joined
- Sep 27, 2005
- Messages
- 29,678
Danny: I have a TG-60Y and put 90 wt in both the pto and drive gear boxes.I filled the pto box approx. 1/2 and the gear box until the oil flows out the overflow-as the manual suggests.When I went shopping for a tiller I chose this one for the overall ruggedness and price.I have used this tiller a lot (and without babying it) and have yet to run into any probs.I also grease the tine shaft bearing frequently and regularly check all the bolts/nuts for tightness. DanB.
