Hootie
Gold Member
- Joined
- May 31, 2002
- Messages
- 261
- Location
- SW ARK
- Tractor
- Kubota BX2200, Kubota ZD 221, Kubota Grand L 5030 HSTC, Kubota RTV, Polaris 500ATP
I love this little BX2200!! /w3tcompact/icons/tongue.gif I unloaded it off the trailer and started pushing up brush piles and was tickled to death! Then I did some leveling with the BB and FEL. Then I tried out the 60" MMM and figured out that this is really a mowing machine. Avoided a few small stumps and thought I would coax them out of the ground. I removed three, but on the fourth the hydraulic hose that operates the dump and roll back started leaking fluid. It is leaking right at the end near the coupling at the bucket. /w3tcompact/icons/frown.gif Maybe I got overzealous, man my stomach sank!
Anyway, I know a hose is not a problem, but I have never changed one. What about air in the hose? I know to put the FEL in a "resting" position before removing the leaking hose, right? Anyway, I am all ears.
This put a damper on the newness, but it is a good tractor.
Anyway, I know a hose is not a problem, but I have never changed one. What about air in the hose? I know to put the FEL in a "resting" position before removing the leaking hose, right? Anyway, I am all ears.
This put a damper on the newness, but it is a good tractor.