GPM of ck30 rear remote

[lmroy1979]

Hi,

What is the gpm of the rear hydraulic remote on a ck30? Is it the full 12gpm of the pump, or is a part of the 12gpm is dedicated to other things like 3ph or power steering?

Thanks,

 

[k0ua]

Workshop manual says 8.7 GPM.. The other side of the pump supply's the power steering.
In an open center system all valves would get the same flow rate. so FEL would get 8.7, your remotes would be 8.7 and the 3p would be 8.7
The remotes get the flow before the 3pt anyway. On most tractors the 3pt is the "tail end of the dog" and the flow dumps into the tank after the 3pt.