Grease Fitting Missing?

[JagAlfaOwner]

I just put my 60 In Belly mower on my TZ25DA. It had grease fittings on only 2 of 3 the Blade Bearings (directly on the blade spindle). Is it possible mine sheared off somewhere or is this normal? I do not remember last August when I greased it last. Any one checking theirs would be appreciated. There were several on the Deck that I got but I am wondering just about the Spindles as I believe they are the one's most needed.

AL

 

[AndyMA]

I would expect all of the spindles to have grease fittings. I would think you could find it by feeling around. It shouldn't be too hard to remove and replace. You want spindle greased.

Andy

 

[Soundguy]

If they did shear off.. just get a zerk tool.. it usually has a extractor, thread chase, and 2 sizes of wrenches onthe ulti-tool..there is one for sae nd metric.

soundguy

 

[Dataway]

Not familar with that deck...but some gearbox driven decks have the zerk for the center blade down low, off to the side below the gearbox.
JohnnyB