Grease from TSC

[mrpoppy58]

I bought a Five Gallon Bucket of that Grease from TSC and I like it. It really works on my loader pins.
mrpoppy

 

[Farmwithjunk]

TSC stores around here carry MARVEL (brand) grease. That's been just about all I've ever used on my 36 year old and 29 year old tractors (that are in like new condition) It would take a minimum of 37 years to convince me anything else is any better.

 

[DieselPower]

Best place to start. http://www.tractorbynet.com/forums/oil-fuel-lubricants/94858-grease-please-educate-me.html

 

[KICK]

I think that if you ask 10 very good mechanics this question, you will get at least 9 different answers. Personally, I like the Kendall Super-Blu.


For that matter, if you ask 10 different bad mechanics, you get 10 different opinions

we buy Kendall Super Blue at work, but we aren't supposed to use it in wheel bearings, just in chassis lubing.

something was said about washout. sooper blue does seem tthinner that other #2 greases, actually flows.

anyway!

 

[SnowRidge]

Moly or no moly is your choice. Moly is generally highly recommended for areas that get large impacts, like loader pivot pins. I'm not aware of high speed problems for moly that Snowridge alluded to, and in fact I have a can of wheel bearing grease (for on-highway wheel bearings) that is heavily moly fortified. If there are high speed issues I'm sure it's at a much higher speed than any greased part on a tractor operates at.

http://129.35.64.91/bpglis/lubtds.nsf/technicaldata/667B21EB6DDA562480256C4E005B80FD?OpenDocument

I wouldn't use it in spindle bearings.

 

[zzvyb6]

I'd focus on he best tasting stuff. Last Spring while doing double duty eating some Dunkin's and greasing the machinery, I noticed a dab of red stuff on my shirt. Assuming it was drippage from the jelly filled, I swiped it onto my tongue. Well it was the TSC red. I did talk better for a while until it washed out. I like grease I can see when the new stuff blows through. I also buy by the case and grease often whether it needs it or not. Going through the motions is a chance to inspect all the other parts for tightness, straightness, and sharpness.

 

[SnowRidge]

I'd focus on he best tasting stuff.

Yuuuuck!!!

 

[cat2]

Can't find any specs on the moly grease I got at tsc if someone could find it please post it.

 

[shvl73]

I'd focus on he best tasting stuff. Last Spring while doing double duty eating some Dunkin's and greasing the machinery, I noticed a dab of red stuff on my shirt. Assuming it was drippage from the jelly filled, I swiped it onto my tongue. Well it was the TSC red.

Now thats a funny story!

 

[Wayne County Hose]

For that matter, if you ask 10 different bad mechanics, you get 10 different opinions

I never thought of it that way. I'll have to meditate on that one.