Greasing the front pivot on a 2210

   / Greasing the front pivot on a 2210 #11  
Mike,

I greased my front pivot again this weekend. I got about 4 or 5 good pumps in before it got really tight. I guess this is a very tight pivot. My grease gun basically stopped when it was full. Yours might have been greased nicely from the dealer.

John
 

Tractor & Equipment Auctions

(2) 10" X 12# X 70.5" (1) 10" X 12# X 104" I BEAM (A57192)
(2) 10" X 12# X...
2022 CASE CX57C EXCAVATOR (A52707)
2022 CASE CX57C...
2023 Air Chipping Hammers (A55851)
2023 Air Chipping...
Bush Hog 72in Rotary Brush Cutter Tractor Attachment (A55851)
Bush Hog 72in...
2018 Deere 85G (A53317)
2018 Deere 85G...
JCT 48" HYD TRENCHER (A52706)
JCT 48" HYD...
 
Top