Gt14 and YM146

   / Gt14 and YM146 #1  

sacsr

Silver Member
Joined
Jan 21, 2010
Messages
241
Location
Kinston, NC
Tractor
Yanmar 187D Terramite T5C Bush Hog D4-10
Hey guys....realize this is not the most popular or supported models....but got to say I am enjoying my 146 at this point. It is not as agile as my craftsman.....but for the heavier stuff when I don't want to load up the 187 and bushhog.....it is perfect. Plus it's a Yanmar. Need I say more. :D

I travel most of SC, mid to east NC, mid to east Va, parts of Md, south GA.

To keep mine going, I would like to find running/non running ones at a reasonable price for parts. For those of you in these areas, if you happen to see one that is available and you are not interested would appreciate a heads up. Yannyman is up in the north east.....so he and I won't be competing on these. I'll let him have all the ones up there. :thumbsup:

This is a great forum and was lucky to find it when I was looking for my first one back a year or so ago.

Thanks to all!

Scott
 
   / Gt14 and YM146 #2  
Scott, don't forget the YM122, YM126 (never seen one) and YM142 will share some parts depending on what you need.
 
   / Gt14 and YM146 #3  
yeah i would love to get hold of some GT bits like the hydraulics for the deck and such. my YM14 was only the second one i have been able to find for sale here in australia for a few years so its odds are very slim. luckily its condition isnt too bad so it should last me for some years, but i still would like to fit the hydraulics to it :( eh one day.........
 
   / Gt14 and YM146 #4  
If I pick up another one and my wife lets me continue to draw breath, I'll see what I can do for you. :thumbsup:
 
   / Gt14 and YM146 #5  
I realize this is an old post but i want to ask anyway. I've got a YM146 that is in great condition however i need a manual. Would you happen to have one or know where i can download a good one? thanks
 
   / Gt14 and YM146 #6  
Check out Hoye tractor. They might have what you're looking for.
 
   / Gt14 and YM146 #7  
I have a soft and hard copy of one. I don't seem to be able to locate the disc it was on otherwise I'd put it up here for people to grab..... And if the paper copy wasn't 2 1/2 inches thick.....
 

Attachments

  • WP_20161113_20_24_22_Pro.jpg
    WP_20161113_20_24_22_Pro.jpg
    262.6 KB · Views: 180
   / Gt14 and YM146 #8  
   / Gt14 and YM146 #9  
Just on a side note with the GT14/146 etc how do you guys find the steering weight wise? I think for a little tractor mine is extremely heavy or is it my imagination?
 

Tractor & Equipment Auctions

Roller Inspection Table (A47369)
Roller Inspection...
American Sanders Floor Edger (A45336)
American Sanders...
2016 Yamaha Wolverine UTV (A47369)
2016 Yamaha...
2014 Volkswagen Passat Sedan (A42744)
2014 Volkswagen...
Feeder Trailer (A47484)
Feeder Trailer...
2025 AllMetal K17 UNUSED Chain Link Fence Set (A47484)
2025 AllMetal K17...
 
Top